1W LED Light Control Night-Light DIY Kit Photosensitive Sensor CON-L Nightlight Electronic Production Suite Electronic DIY Kit


Shipping Time 15-30 Days

In stock

1W LED Light Control Night-Light DIY Kit Photosensitive Sensor CON-L Nightlight Electronic Production Suite Electronic DIY Kit


SKU: 32597386251 Category:

                     <table> <tbody>  <tr>   <td colspan="5">   <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1mH0UXhHI8KJjy1zbq6yxdpXa3.jpg" /> </p> </td>  </tr>  <tr>                 </tr>  <tr>                 </tr>  <tr>   <td colspan="5"> <img class="img-responsive" /> </td>  </tr>  <tr>   <td colspan="5"> <img class="img-responsive" /><br /></td>  </tr> </tbody></table>             <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB15FEjSFXXXXXwXpXXq6xXFXXX3.jpg" />             Feature:                        Kit Name: Optical LED Small Night Light                      Working Voltage: 220V                       Power Consumption: 1W             PCB Size: 25*58mm             Kit Dimensions: 85*55*32 mm           <p> Two. Schematic</p> <p> R1, C1 constitute RC Buck circuit (non-isolated buck), R2 limiting; D1 ~ D4 constitute a bridge rectifier circuit, D5 voltage stable at 24V; Q1 load LED (L1 ~ L4) switching regulator , C2 filtering.</p> <p> When daylight is strong, sensitive resistor R5 low resistance state, then Q1 basic voltage of approximately 0V, Q1 off, LED does not light.</p> <p> Evening light dimmed, light-sensitive resistor R5 high-impedance state, 24V voltage is applied to the base of Q1 through R4, Q1 turns on, LED light.</p> <p> CON- L light-controlled LED small night light, control luminous intensity of LED through the photosensitive resistance inducing the strength of the ambient light ,  it shuts down automatically during the day and opens automatically at night.</p> <p> Three. Circuit schematics</p> <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1Aj_zKxWYBuNjy1zkq6xGGpXam.jpg" /></p> <p> Component list</p> <table>  <tbody>   <tr>    <td> <p align="center"> Component </p> </td>    <td> <p align="center"> Type </p> </td>    <td> <p align="center"> Label </p> </td>    <td> <p align="center"> Number </p> </td>    <td> <p align="center"> Component </p> </td>    <td> <p align="center"> Type </p> </td>    <td> <p align="center"> Label </p> </td>    <td> <p align="center"> Number </p> </td>   </tr>   <tr>    <td> <p> Resistance </p> </td>    <td> <p> 2R2 </p> </td>    <td> <p> R3 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Wire </p> </td>    <td> <p> 50mm </p> </td>    <td> <p> 2 </p> </td>    <td> <p> 2 </p> </td>   </tr>   <tr>    <td>  </td>    <td> <p> 680R </p> </td>    <td> <p> R2 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Screws </p> </td>    <td> <p> M2.3*6 </p> </td>    <td> <p> 4 </p> </td>    <td> <p> 4 </p> </td>   </tr>   <tr>    <td>  </td>    <td> <p> 150K </p> </td>    <td> <p> R4 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Heat shrinkable tube </p> </td>    <td> <p> F2*20mm </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td>  </td>    <td> <p> 680K </p> </td>    <td> <p> R1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> PCB </p> </td>    <td> <p> 25*62mm </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td> <p> Photoresistor </p> </td>    <td> <p> 5528 </p> </td>    <td> <p> R5 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Front cover </p> </td>    <td> <p> 56*88mm </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td> <p> Capacitor </p> </td>    <td> <p> 10uF /25V </p> </td>    <td> <p> C2 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Cover </p> </td>    <td> <p> 56*88mm </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td>  </td>    <td> <p> 274/400V </p> </td>    <td> <p> C1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Shade </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td> <p> Diodes </p> </td>    <td> <p> 1N4007 </p> </td>    <td> <p> D1~D4 </p> </td>    <td> <p> 4 </p> </td>    <td> <p> Flu mask </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td> <p> Zener diode </p> </td>    <td> <p> ST 24V </p> </td>    <td> <p> D5 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Trim </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>   <tr>    <td> <p> LED </p> </td>    <td> <p> F5 </p> </td>    <td> <p> L1~L4 </p> </td>    <td> <p> 4 </p> </td>    <td> <p> Sheet metal </p> </td>    <td> <p> 2 </p> </td>    <td> <p> 2 </p> </td>    <td> <p> 2 </p> </td>   </tr>   <tr>    <td> <p> Transistor </p> </td>    <td> <p> 9014 </p> </td>    <td> <p> Q1 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> Instructions </p> </td>    <td> <p> A4 </p> </td>    <td> <p> 1 </p> </td>    <td> <p> 1 </p> </td>   </tr>  </tbody> </table>  <p> Please Note: Due to the use of non-isolated step-down circuit, so the night light after power, the board will still be higher voltage with, please do not touch circuit boards and related components to prevent electric shock!</p>  <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1SbzQKVXXXXbSXVXXq6xXFXXXW/224361831/HTB1SbzQKVXXXXbSXVXXq6xXFXXXW.jpg?size=75267&amp;height=488&amp;width=456&amp;hash=713bec6dfbc4c2281ef712c9f274981c" /></p> <p> <br /> Assemble Steps:<br /> A. Shell Assembling</p> <p> <br /> 1. Install the plug plate<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1G0QyLFXXXXb7XpXXq6xXFXXXu/224361831/HTB1G0QyLFXXXXb7XpXXq6xXFXXXu.jpg?size=59845&amp;height=800&amp;width=800&amp;hash=3922f8c5b3bc5774a4cd767ec4f533a2" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1JHQvLFXXXXXFXFXXq6xXFXXXi/224361831/HTB1JHQvLFXXXXXFXFXXq6xXFXXXi.jpg?size=55642&amp;height=800&amp;width=800&amp;hash=c86aef275cb5c6bc7d5f4e535d4c33fe" /><br /> 2. Plus tin solder with the bottom of the plug plate bottom<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1CxMELFXXXXcDXXXXq6xXFXXXw/224361831/HTB1CxMELFXXXXcDXXXXq6xXFXXXw.jpg?size=75841&amp;height=800&amp;width=800&amp;hash=5990b9acc7184d655756dda6fa22b821" /><br /> 3. Install the Lampshade, Decoration Strip, Reflectors to the corresponding position<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1_NIvLFXXXXXcXFXXq6xXFXXXS/224361831/HTB1_NIvLFXXXXXcXFXXq6xXFXXXS.jpg?size=56956&amp;height=800&amp;width=800&amp;hash=2cbb89f0abbed721491a6cb949eb0eaf" /><br /> B. PCB Welding Steps<br /> 1. Make the shrink tube cover the photoresistor pin, then heating the shrink tube with the soldering iron or lighter<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1_Q3LLFXXXXXaXXXXq6xXFXXXH/224361831/HTB1_Q3LLFXXXXXaXXXXq6xXFXXXH.jpg?size=94994&amp;height=800&amp;width=800&amp;hash=bf6a8048c18eb74a7bd5935ea469d6f5" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1jUoGLFXXXXbaXXXXq6xXFXXXm/224361831/HTB1jUoGLFXXXXbaXXXXq6xXFXXXm.jpg?size=70886&amp;height=800&amp;width=800&amp;hash=da8310f81880945109805c1c5929a378" /><br /> 2. Weld Cable<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1xfoDLFXXXXb0XXXXq6xXFXXXi/224361831/HTB1xfoDLFXXXXb0XXXXq6xXFXXXi.jpg?size=74829&amp;height=800&amp;width=800&amp;hash=d9babfa0f45f9af3ef4bf0093cf70ee8" /></p> <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1EUoGLFXXXXaUXXXXq6xXFXXXK/224361831/HTB1EUoGLFXXXXaUXXXXq6xXFXXXK.jpg?size=63901&amp;height=800&amp;width=800&amp;hash=84b7318754be6c8a86acda596a9d7967" /><br /> 3. The wire and iron sheet should be wekded together<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1dWABLFXXXXatXpXXq6xXFXXXd/224361831/HTB1dWABLFXXXXatXpXXq6xXFXXXd.jpg?size=70858&amp;height=800&amp;width=800&amp;hash=e2815fc7b1cb11d524d41ff74c93dee2" /><br /> 4. Fixing screws<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1BxsjLFXXXXcmXVXXq6xXFXXXI/224361831/HTB1BxsjLFXXXXcmXVXXq6xXFXXXI.jpg?size=86499&amp;height=800&amp;width=800&amp;hash=e44813cad207a4b37b91ec20f11c8505" /><br /> 5. Assemble the front and back cover together by screws<br /> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB16MokLFXXXXa5XVXXq6xXFXXXa/224361831/HTB16MokLFXXXXa5XVXXq6xXFXXXa.jpg?size=68763&amp;height=650&amp;width=650&amp;hash=b2fd3c5161a8b2c480cbba5edcb44a88" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1JqcvLFXXXXb4XpXXq6xXFXXXW/224361831/HTB1JqcvLFXXXXb4XpXXq6xXFXXXW.jpg?size=51842&amp;height=650&amp;width=650&amp;hash=393e22017fe44762867890eedcaae95e" /></p> <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB16rjLSFXXXXbeaXXXq6xXFXXXz.jpg" /></p> <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1jkDRKVXXXXaSXVXXq6xXFXXXl/224361831/HTB1jkDRKVXXXXaSXVXXq6xXFXXXl.jpg?size=126981&amp;height=800&amp;width=800&amp;hash=2dcc2e842c60727be5adb58f5d4833c9" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1CsXPairxK1RkHFCcq6AQCVXav.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1eDp0aoLrK1Rjy0Fjq6zYXFXah.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1d8NWaiLrK1Rjy1zdq6ynnpXaD.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1b0hVaizxK1RkSnaVq6xn9VXar.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1yB45afjsK1Rjy1Xaq6zispXay.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1gJhVaizxK1RkSnaVq6xn9VXaG.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1STVRainrK1Rjy1Xcq6yeDVXa4.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1iTRWaizxK1RjSspjq6AS.pXaX.jpg" /></p> <p> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1jd.qSFXXXXbBXXXXq6xXFXXX3.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1dqr0SFXXXXXPXVXXq6xXFXXXj.jpg" /><img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1CMTTSFXXXXbQXVXXq6xXFXXX9.jpg" /></p>           <br />                  <table> <tbody>  <tr>   <td colspan="4"> <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB1DA9nMVXXXXcAXXXXq6xXFXXXe/224361831/HTB1DA9nMVXXXXcAXXXXq6xXFXXXe.jpg" /> </td>  </tr>  <tr>              </tr>  <tr>              </tr> </tbody></table>



Weight0.05 kg
Dimensions15 × 12 × 10 mm



Logic ICs

Supply Voltage

AC 220V

Brand Name


Operating Temperature

-20 ~ 60 Celsuis



Model Number

CON-L Night-Light Kit

Dissipation Power



Electronic Circuit

Power Consumption


PCB Size


Kit Dimensions

85*55*32 mm


diy electronic kit electronique


There are no reviews yet.

Be the first to review “1W LED Light Control Night-Light DIY Kit Photosensitive Sensor CON-L Nightlight Electronic Production Suite Electronic DIY Kit”

This site uses Akismet to reduce spam. Learn how your comment data is processed.