ECL-132 Remote Control clock – Blue Screen Display DIY Kit

$37.99 $29.99

ECL-132 remote control clock can display clock by 132pcs 5mm LEDs. Display character’s size is 8143mm(HighWith). Kit’s size is 229*89mm with black filter plate.

FREE WORLDWIDE SHIPPING
Shipping Time 15-30 Days

In stock

ECL-132 Remote Control clock – Blue Screen Display DIY Kit

$37.99 $29.99

SKU: 32674583740 Categories: ,

ECL-132 Remote Control clock Instructions:

NOTE: There are six buttons on the remote controller, but just five buttons have functions. The upper button has no functionality.

Button Functions:

  • Middle button: Main Menu.
  • Top button: Increase
  • Bottom button: Reduce
  • Right button: Right Options
  • Left button: Left Options

Adjust the time sub menu

Flashing LED is the currently selected bits. Right 2bits can adjust hours and left 2bits can change minutes by other four buttons. Press the middle button to save and quit these options, and enter to alarm settings submenu.

Alarm settings submenu

It is the master switch for five channels alarm at first. The first-bit display “C” and the last 2 bits flash and display “on” or “OF.”

Top button and Bottom button can switch on /OF. If select “OF,” Then press Middle button to enter to error correction submenu.

If select “on,” Press middle button to set the first channel alarm. The first 2bits display “C1” and the last 2 bits flash and display “on” or “OF.”

Top button and Bottom button can switch on /OF. If select “OF,” Then press the Middle button to set the second channel alarm.

If select “on,” Press Middle button to set hour and minutes. Flashing LED is the currently selected bits.

Right 2bits can adjust hours and left 2bits can change minutes by other four buttons. Right button and left button can select hours and minutes.

Top button and bottom button can set alarm time. Then Press the Middle button to set the second channel alarm. Then set other alarms by the same steps.

After setting the fifth alarm, press Middle button to enter to the error correction submenu.

Error Correction submenu

The first-bit display “n” and the last 2 bits flash and display “on” or “OF.” Top button and Bottom button can switch on / off.

If select “OF,” Then press the middle button to normal display. If select “on,” Press Middle button to set correction parameter.

The last 2bits flash and represent days. Press Middle to set second. Press the middle button to standard display.

Button features shortcuts

  1. On normal display status, pressing the top button can close or open display.
  2. On normal display status, pressing the bottom button can switch hour/minute or minute/second display. (Four LEDs in the middle will not flash or be lit on the minute/second status).
  3. On normal display status, press left button can set the 5-channel alarm.
  4. On normal display status, press right button to correcting second, LED will display “ESC,” after seconds, display minute/second and second bits flash. So after seconds,4 bits flash.

Make sure the time is accurate then press the middle button to set the seconds and to go to normal display.

Components

ComponentNumberParameterQuantity
Remote control list:
IC BA5104U1SOP-161
S8050Q1SOT-231
0805 CapacitorC1,C2100pF2
Electrolytic capacitorC322uF 25V1
455E CrystalY11
Infrared Emitting LEDD13mm1
CR2025 Battery shrapnelJ12
ScrewM1.4*35
PCB76*30.5mm1
Key Foil83*38mm1
Shell86*40*6mm1
Clock control kit list:
Metal film resistorR1-R810K8
Ceramic capacitorC6,C75pF2
Ceramic capacitorC4,C530pF2
Ceramic capacitorC30.01uF1
Electrolytic capacitorC110uF 25V1
Electrolytic capacitorC2100uF 16V1
1N4148D1DO-351
S8550Q1-5TO-925
CrystalY232.768KHz1
CrystalY112MHz1
STC11F04EU1DIP-201
DS1302U2DIP-81
74HC138NU3DIP-161
DIP-8 IC SocketU11
DIP-16 IC SocketU21
DIP-20 IC SocketU31
BuzzerLS15V1
VS1738 Infrared receiverU41
CR2025 battery boxBT11
1*8P Female pinJ2A,J3A2.54mm2
USB cable80cm1
PCB70*43mm1
Display screen kit list:
Metal film resistorR1A1-R4G4220ohm130
Metal film resistorRA-RDP330ohm8
1*8P Male pinJ2B,J3B2.54mm2
Blue LED1A1-4G4,1DP1,1DP2,2DP1,2DP15mm132
Copper CylinderM3*9+66
Copper CylinderM3*156
ScrewM3*512
Filter plate1
Aluminum box1
PCB229*89mm1

Comments

comments

Weight0.4 kg
Dimensions15 × 12 × 10 mm
Condition

New

Type

Logic ICs

Model Number

Clock DIY Kit

Supply Voltage

5V

Brand Name

IS

Dissipation Power

none

is_customized

Yes

Operating Temperature

-30~85 Celsius

Application

Clock

Package

well package

Work Current

30-50mA

Size

233*93*30mm

Display character size

81*43mm(High*With)

Kit size

229*89mm

Name

It is DIY kit

Reviews

There are no reviews yet.

Be the first to review “ECL-132 Remote Control clock – Blue Screen Display DIY Kit”

This site uses Akismet to reduce spam. Learn how your comment data is processed.