Electronic LED Time Display Kit Rotation LED Clock DIY Kit

$35.00 $26.04

LED time display Kit with clock display. Displays the hour and minutes under normal circumstances on 4-Bit digital tube & 2-Channel independent alarm.

FREE WORLDWIDE SHIPPING
Shipping Time 15-30 Days

In stock

Electronic LED Time Display Kit Rotation LED Clock DIY Kit

$35.00 $26.04

SKU: 32586847230 Categories: ,

Electronic LED Time Display Kit Functions:

  1. Clock display. Displays the hour and minutes under normal circumstances on 4-Bit digital tube.
  2. Display seconds on LEDs
  3. Timekeeping function
  4. 2-Channel independent alarm.

Notes:

  1. There are 13 short circuit pad marked J1 to J13. User can weld it by pin from other components such as metal film resistors or LEDs.
  2.  DC2 on PCB is standby power.
  3. Input power is 4.5V-5.5V. If users don’t use standby power ,you don’t need weld VD1-2(1N5819) on PCB but need to weld pad which has marked “A”.

Components:

Component Number Parameter Quantity
Electrolytic capacitor C1 10uF 1
Ceramic capacitor C2,C3 30pF 2
0805 Capacitor C4,C6-C12 104 8
Electrolytic capacitor C5 220uF 1
Electrolytic capacitor C13 100uF 1
1*2P Male pin DC5V 2.54mm 1
4Bit digital tube DS1 1
74HC595 IC1-IC5 SOP-16 5
20P IC Socket IC6 1
STC11F04 DIP-20 1
3mm LED LED5,LED10,LED15,LED20,

LED25,LED30,LED35,LED40,

LED45,LED50,LED55,LED60

Red 12
3mm LED White 48
Buzzer LS1 1
S8550 Q1-Q7 SOT-23 7
0805 Resistor R1-R68 R80 470ohm 69
0805 Resistor R69-R73,R76,R76,R77,R79 10K 8
Metal film Resistor R74,R75 10K 2
0805 Resistor R78 5.1K 1
6*6*5 Button S1,S2,S3 3
HC-49S Crystal Y1 12MHz 1
1N5819 VD1-2 1
PCB 1
DS18B20 DS2 TO-92 1
IR receiver H1 HX1838 1
Infrared remote control 1

Button Debugging Instructions:

  • Button S1: Reset button
  • Button S2: Mode selection button
  • Button S3: Function control buttons
Mode(Display on first 2 Bits) Function Debug(Display on 2Bits from right) Instruction
01 Display and Correction seconds Correction seconds It can be used as a stopwatch
02 Display and Correction minutes Correction minutes
03 Display and Correction hours Correction hours
04 Hourly timekeeping 0:Timekeeping at 00:00-23:00

1:Timekeeping at 7:00-22:00

2:Close Timekeeping

05 Adjust the time speed 0-99 Position. Default 50

The higher the number, the faster time

06 1-Channel Alarm Clock minutes adjustment Display and adjustment
07 1-Channel Alarm Clock hours adjustment Display and adjustment
08 2-Channel Alarm Clock minutes adjustment Display and adjustment
09 2-Channel Alarm Clock hours adjustment Display and adjustment

Infrared remote control instructions:

  1. Button “0” :Display status 0. 60pcs LEDs display overlay
  2. Button “1”: Display status 1. 60pcs LEDs flash display
  3. Button “2”: Display status 2. 60pcs LEDs water lights display
  4. Button “U/SD”: Open/Close display 12 Hourly time LED(Red LED)
  5. Button “Power”:Close all display
  6. Button “Mute”: Close all timekeeping function
  7. Button “EQ”:Display current temperature
  8. Button “Mode”:Enter debug status.

Infrared remote control debug instructions:

  1. Button “0-9”: Enter status 0-9(Reference “Button Debugging Instructions”)
  2. Button “Pre” and “Next”:Status plus 1 or minus 1. (Display on first 2 Bits)
  3. Button “VOL-” and “VOL+”: Debug(Display on 2Bits from right)
  4. Quit status and normal display.

 

 

Comments

comments

Weight 0.1 kg
Dimensions 1 × 1 × 1 mm
Condition

New

Operating Temperature

-20 ~ 60 Celsuis

Model Number

Rotation LED Clock Kit

Application

Alarm

Brand Name

IS

is_customized

Yes

Type

Timer

Supply Voltage

4.5V-5.5V

Reviews

There are no reviews yet.

Be the first to review “Electronic LED Time Display Kit Rotation LED Clock DIY Kit”

This site uses Akismet to reduce spam. Learn how your comment data is processed.